1.
If the flash output at 10 feet is F11, what would be the new output if the flash was set to 1/4 power?
2.
Which of the following is NOT a drawback of using an off camera flash with an infra red trigger?
3.
You are photographing a family around dusk and your flash measures F5.6 at 7ft. You want to use F2.8 to get a shallow depth of field. What is the new distance you will need to place the flash from the family in order to use F2.8?
4.
If a flash exposure measures F11 @ 125 at 100 ISO, what would be the new setting at 400 ISO?
5.
Flash units that have the power supply built into the unit and that are used with light stands are called
6.
You are photographing a high school senior with his car. The sun is used to back-light him. Which of the following techniques should be used to produce the best result?
7.
When using high speed sync, which of the following is true?
8.
You are photographing an athlete on the field using multiple off-camera flashes. What is the most reliable method to use for ensuring all flashes fire properly?
9.
If a flash measures F16 at full power and at 10 feet from the subject, what power setting would be required to have the flash measure F16 when placed 5 feet from the subject?
10.
What is the type of flash unit that is designed to connect to a camera via a "hot Shoe".
11.
One advantage of a monolight over a power pack and flash head system is
12.
When using a flash, the maximum native sync speed is determined by the
13.
With flash photography, only the _______ controls the exposure for the flash.
14.
If a camera's designated sync speed is listed as 1/250, which of the following shutter speeds would likely encounter sync problems?
15.
When using the TTL flash setting,
16.
Placing a speedlight on a flash bracket will help reduce the possibilty of
Be sure to click Submit Quiz to see your results!
