1.
When using a flash, the maximum native sync speed is determined by the
2.
Moving a light source closer to a subject will change the quality of the light by making it
3.
Flash units that have the power supply built into the unit and that are used with light stands are called
4.
When using a 2:1 ratio, the highlight side of the subject's face measures F8. What will the shadow side measure?
5.
If a flash measures F16 at full power and at 10 feet from the subject, what power setting would be required to have the flash measure F16 when placed 5 feet from the subject?
6.
To increase the contrast of the subject and the background when using a softbox,
7.
In creating a lighting pattern with directional light, the primary function of the main light is to
8.
If a flash exposure measures F11 @ 125 at 100 ISO, what would be the new setting at 400 ISO?
9.
This specialty light defines and sculpts the subject by adding a strong highlights from behind the subject to add interest, create form or separation.
10.
With the main light set to F11 and placed at 45° to the subject and the fill located behind the camera, what would be the output of the fill need to be to get a 2:1 lighting ratio at the subject?
11.
The main light is placed at 45 degrees from the subject and set to F8. The fill light is placed behind the camera. How will it need to be set to create a 3:1 ratio on the subject?
12.
In order to reduce the possibility of unwanted shadows, the fill light should be
13.
To create intense color on a background
14.
You are photographing a high school senior with his car. The sun is used to back-light him. Which of the following techniques should be used to produce the best result?
15.
Which of the following light patterns would flatter a subject with a round face?
16.
Which of the following is the best choice for photographing a subject in mixed lighting?
17.
You are photographing a family around dusk and your flash measures F5.6 at 7ft. You want to use F2.8 to get a shallow depth of field. What is the new distance you will need to place the flash from the family in order to use F2.8?
18.
What is the type of flash unit that is designed to connect to a camera via a "hot Shoe".
19.
With the main light set to F11 and placed at 45° to the subject and the fill located behind the camera, what would be the output of the fill need to be to get a 2:1 lighting ratio at the subject?
20.
If the flash output at 10 feet is F11, what would be the new output if the flash was set to 1/4 power?
21.
When phtographing a low key image
22.
Which of the following lighting places the main light on the side of the face towards the camera?
23.
Which of the following methods will emphasize texture in a composition?
24.
The main light is placed at 45 degrees from the subject and set to F11. The fill light is placed behind the camera. What is the lighting ratio if the fill light is set to F5.6?
25.
The main light is placed at 45 degrees from the subject and set to F8. The fill light is placed behind the camera. How will it need to be set to create a 3:1 ratio on the subject?
26.
To create a rim light on a subject, the light must be positioned _____ the subject. A. above B. behind ✓ C. to the left of D. to the right of
27.
Which of the following light patterns would flatter a subject with a round face?
28.
You are photographing a high school senior with his car. The sun is used to back-light him. Which of the following techniques should be used to produce the best result?
29.
What is the lighting ratio if the subject's face measures F11 on the highlight side and F5.6 on the shadow side?
30.
Increasing the size of the light source will make the light
31.
The fill light is used to control the
32.
When using the TTL flash setting,
33.
When photographing on location outdoors, the best lighting for portraits will likely be found
34.
If a camera's designated sync speed is listed as 1/250, which of the following shutter speeds would likely encounter sync problems?
35.
When considering the visible light spectrum, some fluorescent lighting may create a color shift to ________ when photographing at 5500K.
36.
LED lights are an example of what type of lighting?
37.
Moving a light source closer to a subject will change the quality of the light by making it
38.
Which of the following lighting modifiers would be best for keeping stray light from the main light from striking the background?
39.
With flash photography, only the _______ controls the exposure for the flash.
40.
Which of the following lighting modifiers would be best for keeping stray light from the main light from striking the background?
41.
Which of the following would provide the greatest contrast when lighting a subject?
42.
The color temperature of "daylight" is generally said to be
43.
Placing a speedlight on a flash bracket will help reduce the possibilty of
44.
You are creating a head shot of a female executive who has something of a "full" face. Which of the following lighting styles will be the most flattering?
45.
Which of the following is NOT a drawback of using an off camera flash with an infra red trigger?
46.
To avoid creating a silhouette of a backlit subject,
47.
One advantage of a monolight over a power pack and flash head system is
48.
The hair light, when used as a proper accent light, does its job best when it is positioned
49.
During an environmental session using natural light, the subject has good catchlights in the eyes, but flat lighting on the face. The best way to improve this situation would be to use a
50.
The main light should be placed high enough to create a catchlight
51.
When using a 3:1 lighting ratio, the highlight side of the subject's face measures F5.6. What should the shadow side measure?
52.
When creating a 4:1 ratio, what is the difference between the highlight side and the shadow side of the face?
53.
The subject's hair is blending into the background. One remedy would be to
54.
For light to be directional on a subject there must be
55.
During an environmental session using natural light, the subject has good catchlights in the eyes, but flat lighting on the face. The best way to improve this situation would be to use a
Be sure to click Submit Quiz to see your results!
